On most Dyson vacuums, you can do this by pressing the red button at the top of the canister, but check the manual if you’re not sure..
You can also choose if you want the brushes rotating or not in all three power settings, which is useful for avoiding scratches on delicate floors or sending debris flying across hard floors.. Our main issue with the floorhead is how tricky it is to remove the brushbar.You need to remove six screws before you can wrestle it out, and Halo doesn’t recommend removing it at all.
Instead, it’s suggested to cut tangled hair and fibres with scissors, which is a less effective system than you’ll find elsewhere..The only hint at a fancy extra is the light indicator on the front of the floorhead.If it’s green, you know everything is running OK.
But if there’s a blockage, the light will turn red, or the cleaner will switch itself off altogether.. Other Tools and Accessories.In the box, you get a crevice tool, dusting brush, upholstery tool, wall mount, and 26 dust pouches, which is roughly enough to last a year..
The tools are all pretty standard, but the bristles on the dusting brush are a little on the stiff side.
It’s fine for window sills and shelves, but we’d suggest avoiding it when cleaning delicate surfaces.. All the tools can be attached to the main wand or to the body in handheld mode.If the hair is too thick to cut, then you may need to remove the brush roll to untangle it.
Some vacuums make this simple, while for others it can be a difficult process.Check the manual to find out how to remove the brush..
Step 3: Unclog and Clean the Vacuum’s Hose.A clogged hose doesn’t just reduce your vacuum’s suction.